IJUST ONE AIO KIT – GETTING TO KNOW THE LATEST ELEAF KIT
The iJust One AIO Kit by Eleaf is the latest style in all-in-one (AIO) vaping. It thoughtfully combines a large 2ml tank with a built-in battery bringing you an all-in-one vaping experience. And it’s small enough to fit in the palm of your hand or in your pocket. As well as being compact, this AIO system comes in numerous colors. Choosing between black, silver, white, red, grey and blue allows you to pick the color that’s most suited to you.
THE IJUST ONE AIO TANK
The tank attached to this great AIO is removable and 510 threaded. It has a non-adjustable bottom air flow comprised of 6 angular cutouts. This is located on the battery itself below the tank. It is a top fill tank as well and comes with a standard 510 threaded drip tip. The drip tip is interchangeable for other 510 drip tips if you prefer. Also, you can use EC coils for a direct mouth hit. GS coils can be used for mouth-to-lung inhaling, just use the included sleeve. These features make it easy to use and maintain.
THE IJUST ONE AIO BATTERY
The iJust ONE AIO has a built-in 1100mAh battery that will give you hours of vape time between charges. Speaking of charging, this AIO is charged with a micro USB charger. The iJust one battery can be charged using a wall port or computer with the provided micro USB cable. Do not use any other charging cables to charge this device besides the one provided. While charging, the light beneath the charging port will glow red. When fully charged the light will go off. It has a 0.15 to 3.0 ohm Atomizer Resistance Range. A 50W Maximum Output and Direct Voltage Based 4.2V DC Output.
PROTECTIONS IN PLACE
It also has Over Charge, Over Current and Over Discharge Protections. As well as these great protective features, there are several other protections in place. Designed to keep the iJust ONE AIO functioning properly. Atomizer protection cuts off the output anytime your inhale time exceeds 15 seconds. The indicator light will flash 10 times and then the output will cut off. If a short circuit occurs, before vaping, the LED light will flash 5 times and automatically shut off. If the short circuit happens during vaping, the LED light will flash 3 times.
HOW TO
- To power on and off, rapidly press the button 5 times within 2 seconds. The device will flash 5 times when turned on.
- To fill the tank with e-liquid, first unscrew the top cap and remove. Fill the tank to just under the edge of the glass and replace the top cap.
- To replace the coil unscrew the top cap, unscrew the coil and replace with a new one. Then replace the top cap. Always remember to prime a new coil by dripping a few drops of liquid into the holes on the sides. This helps to saturate the coil and prevents burning the coil immediately. Also let the tank sit for a few minutes after filling to fully absorb the liquid. Again, this helps to prevent burning out the coil.
CONCLUSION
Overall, this iJust ONE kit by Eleaf is an all-around great vape in an AIO design that makes life easier.
